IROAD OBDII Power Cable

The IROAD OBD-II Power Cable, is tailored for Electric, Non-Electric, and Hybrid Vehicles. Easily plug it into the OBD terminal to activate parking recording with IROAD dash cams, offering a convenient, plug-and-play solution for parking mode.

With its built-in Low Voltage cut-off at 11.2V, the IROAD OBD-II cable integrates with your dash cam's voltage cut-off, usually set at a higher threshold. Parking mode is initiated shortly after turning off the vehicle, and in some models, the vehicle needs to be stationary for 5 minutes.

• Status LED
• Recording Mode Switch (S: Driving Mode Only / P: Driving & Parking Mode)
• Overcurrent shutdown (Minimum 3.4A)
• Stop & Go Technology Support
• Compatibility with Petrol, Hybrid and Electric Vehicles
• Compatible with 12volt and 24volt Vehicles

Easy to Install, Plug and Play

IROAD OBD Power Cable 2nd Generation IM-300

IM-300 offers an easier Plug & Play power option for installing a dash camera. By connecting directly to the vehicle's OBDII port, it reduces the risk of damaging the vehicle's wiring. It also provides better protection for the vehicle with its overcurrent cut-off circuit design.

Features

Plug, Play & Forget

The IM-300 OBDII Power Cable is a Plug, Play & Forget alternative to the traditional dash cam hardwiring cable. With a straightforward, quick setup, anyone can install a dash cam using the IM-300, without needing professional installation services.

ONE cable for ALL vehicles

The IM-300 OBDII Power Cable is a Plug, Play & Forget alternative to the traditional dash cam hardwiring cable. With a straightforward, quick setup, anyone can install a dash cam using the IM-300, without needing professional installation services.

EV: EVs | F: Fuel & Hybrid

*The IM-300 is also compatible with 24V vehicles (trucks or commercial vehicles).

Parking Mode Enabled

Just like the traditional hardwiring fuse cable, the OBDII power cable also enables 24/7 Parking Mode recording. Through a Recording Mode switch on the cable's plug connector, users can choose to turn ON/OFF the parking mode recording capability:

S: Driving Mode Only | P: Driving & Parking Mode

LED

Verify operation with LED

Set Recording Mode

Switching S / P

Overcurrent Cut-off

Designed circuit to protect overcurrent

Built-in G-sensor

G Sensor and voltage driven scenario

Stop & Go Supporting

Operating on STOP & GO vehicles

Electric

The ACC function works on all vehicles (Especially parking mode)

Specification

Product

IROAD OBDII Power Cable

Model

IM-300

Input Voltage

DC 12V ~24V

Output Voltage

DC 12V ~24V / Max 2A

Length

2M

Operating Temperature

-40°c ~ 85°c

Overcurrent Cut-off

Min 3.4A