Loaded Enclosures

Add more bass to your sound system with the Linking Kit for Dual 12″ Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine’s new ProLink™ technology. Matching System Design The KTX-H12 was designed for both function...

The DBX 30.3 car audio subwoofer box is designed to enhance the audio system performance in the low range frequencies, optimizing the spaces and ensuring a quick, not too invasive installation. The subwoofer unit, which is the DS sub, provides a punching, dynamic, surrounding bass. The very thick MDF enclosure,...

Great Bass Upgrade! 12″ Sub in Ported Enclosure with matching Amp and Wiring Kit. Connects to any aftermarket head units and most factory head units. Specifications 12″ sub 150 watts RMS 500 watts Peak Amp 125 watts RMS 250 watts Peak Enclosure Dimensions Height 406mm Width 446mm Bottom Depth 372mm

TUBE POWER Ultra-deep and surprisingly loud, the TB subs mount in your trunk or your truck with equal ease. You get the bump you want without losing the space you need. Features: Two Ohm SpeakerThick ABS Tube ConstructionFlexible Horizontal or Vertical Mounting SystemSpring-Loaded Speaker TerminalsCompR Woofer and Reflex SubCeramic MagnetAdvanced...

TUBE POWER Ultra-deep and surprisingly loud, TB subs mount in your trunk or your truck with equal ease. You get the bump you want without losing the space you need. Features: Four Ohm SpeakerThick ABS Tube ConstructionFlexible Horizontal or Vertical Mounting SystemSpring-Loaded Speaker TerminalsCompR Woofer and Reflex SubCeramic MagnetAdvanced Heat...

Single 10" TL7T 2-Ohm Enclosure Covered in stylish black carpeting and built with thick MDF construction, these sturdy enclosures take some serious power, yet easily fit under your seat. Features: Genuine KICKER L7T Subwoofer Included Angled Design for Excellent Fit Heavy Internal Bracing Single 2-Ohm Terminal Easy to Install...

Single 12" TL7T 2-Ohm Enclosure Whether it’s mounted in a truck, sedan or hatchback, the massive power handling and tiny footprint lets you take your music everywhere, with innovation and sound quality that’s all KICKER. Features: Genuine KICKER L7T Subwoofer Included Angled Design for Excellent Fit Heavy...

Single 8" TL7T 2-Ohm Enclosure KICKER Sub Enclosures are the perfect solution when space is at a premium. Covered in stylish black carpeting and built with thick MDF construction, these sturdy enclosures take some serious power, yet easily fit under your seat. Features: Genuine KICKER L7T Subwoofer Included Angled...

Bass In Any Space The TRTP 10-inch Subwoofer Enclosure is the easiest way to get great bass under your seat, in your cargo area or in the trunk. The enclosures for the reFLEX™ Subwoofer and CompRT Sub, pre-wired to a single 2-Ohm terminal, takes serious punishment as you stack your...

Bass In Any Space The TRTP 12-inch Subwoofer Enclosure is the easiest way to get great bass under your seat, in your cargo area or in the trunk. The enclosures for the reFLEX™ Subwoofer and CompRT Sub, pre-wired to a single 2-Ohm terminal, takes serious punishment as you...

Stack Your Stuff The high-output Comp Down-Firing Enclosures are tough as nails. Load your cargo right on top of the sub enclosure for extra space – with plenty of bass! No grilles needed. Comp Power With full perimeter venting and UniPlate™ back plate and pole piece, the Comp subwoofer has...

The MTX TNP212DV includes the TNE212DV high-output dual 12" 1000W RMS ported subwoofer enclosure with included MTX amplifier. The best value subwoofer pack in in Australia & NZ! It’s an ideal solution for anyone looking for the easiest way to add bass to their vehicle without breaking their bank or going over the top. The TNP212DV...

P1-1X12   The P1-1X12 is a single P1 12” vented enclosure with 250 Watts RMS power handling wired to a 4-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals. The most convenient way to get low frequency...

P1-2X12   The P1-2X12 is a dual P1 12” vented enclosure with 500 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals. The most convenient way to get low frequency...

P2-1X12   The P2-1X12 is a single P2 12” vented enclosure with 400 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals. The most convenient way to get low frequency...