Rockford Fosgate - P3-1X10 - Ported enclosure 1X10 Punch P3D2 sub 500WRMS @ 1OHM
- ported hatchback-style enclosure with one 10" Punch P3 subwoofer
- 5/8" medium density fiberboard construction covered with black carpet
- 1-ohm total impedance
- power handling: 250-500 watts RMS (1000 watts peak power)
- frequency response: 27-250 Hz
- sensitivity: 82 dB
- 17"W x 13-1/8"H x 16"D1 x 13-3/4"D2
- warranty: 1 year
What's in the box?
- Vented subwoofer enclosure loaded with one Punch P3D2-10 10" Woofer
- Installation and Operation Instructions
Features and Specs
|Woofer Size (inches)||10|
|Woofer Material||Anodized Aluminum|
|Pieces in System||1|
|Second Depth (inches)||13-3/4|
|Connector Type||Spring post|
|Frequency Response||27-250 Hz|
|Power Range (Watts RMS)||250-500|
Punch Woofer: The enclosure houses one front-firing Rockford Fosgate Punch P3D2-10 10" subwoofer. The dual 2-ohm voice coils are internally wired in parallel to present a 1-ohm load. The sub features a hybrid StampCast basket, an Anodized aluminum cone, and Santoprene surround. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.
Spider: Dual spiders made from tear and fatigue resistant poly-cotton improve mechanical stability under high excursion, maintaining consistent excursion characteristics.
Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.
Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of one front firing 10" Punch P3 series subwoofer with a proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.
Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.
Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet is black.
Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.
Power Handling: The subwoofer can handle up to 500 watts RMS; 1000 watts peak power.
CEA-2031 Compliant: Power handling on the P3D2-10 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.
Dimensions: The depth dimensions listed in Features & Specs include the subwoofer's trim ring, which adds approximately 7/8 of an inch. The depth of just the enclosure is 15-1/8 inches at the base and 12-7/8 inches at the top.