Rockford Fosgate - P1-1X10 - Ported enclosure 1X10 Punch P1 sub 250WRMS @ 4OHM

Shipped in 2-3 Working Days
or 4 interest-free payments of $87.25
Learn more
  • ported hatchback-style enclosure with one 10" Punch P1 subwoofer
  • 5/8" medium density fiberboard construction covered with black carpet
  • 4-ohm total impedance
  • power handling: 50-250 watts RMS
  • peak power: 500 watts
  • frequency response: 30-250 Hz
  • sensitivity: 85 dB
  • 17-1/16"W x 13-1/4"H x 16-1/8"D1 x 13-7/8"D2
  • warranty: 1 year

What's in the box?

  • Vented subwoofer enclosure loaded with one Punch P1S4 10" Woofer
  • Installation and Operation Instructions

Features and Specs

Woofer Size (inches) 10
Woofer Material Kevlar/Paper
Enclosure Type Ported
Color Black
Pieces in System 1
Width (inches) 17-1/16
Height (inches) 13-1/4
Depth (inches) 16-1/8
Second Depth (inches) 13-7/8
Connector Type Spring post
Frequency Response 30-250 Hz
Power Range (Watts RMS) 50-250
Maximum Wattage 500
Sensitivity 85 dB
Impedance 4 ohms

Product Research


Punch Woofer: The enclosure houses one front-firing Rockford Fosgate Punch P1S4-10 10" subwoofer. The 4-ohm, single voice coil sub features a StampCast steel frame, a Kevlar fiber reinforced paper cone, and NBR surround (Nitrile Butadiene Rubber). An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.

Spider: A compliant linear spider made from tear and fatigue resistant poly-cotton improves mechanical stability under high excursion, maintaining consistent excursion characteristics.

Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.

Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of one front firing 10" Punch P1 series subwoofer with a proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.

Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.

Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet is black.

Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.

Power Handling: The subwoofer can handle up to 250 watts RMS; 500 watts peak power.

CEA-2031 Compliant: Power handling on the P1S4-10 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.

Dimensions: The depth dimensions listed in Features & Specs include the subwoofer's trim ring, which adds approximately 7/8 of an inch. The depth of just the enclosure is 15-1/4 inches at the base and 13 inches at the top.

Write Your Own Review
You're reviewing:Rockford Fosgate - P1-1X10 - Ported enclosure 1X10 Punch P1 sub 250WRMS @ 4OHM
Copyright © 2018 Ministry of Bass. All rights reserved.