Morel - Ultimo Ti 124 12inch SVC 4 ohm Subwoofer 1000 WRMS

Shipped in 2-3 Working Days
ultimo Ti 124

Morel - Ultimo Ti 12inch SVC 4 ohm Subwoofer 1000 WRMS

While most subwoofers are little more than high-output bass makers, the Ultimo series was engineered with a synergy of tight, controlled musicality and life-like deep bass reproduction with no equal for delivering the ultimate bass experience.

Ultimo Titanium subwoofers are engineered to set a new standard in subwoofer technology and bass performance, equipped with Morel’s most advanced, cutting–edge technology derived from the company’s HiFi bass drivers. At the heart of the new subwoofers is Morel’s titanium voice coil former. Exceptionally stiff and lightweight, the titanium improves the dynamics of the driver for even quicker transient response, with lower distortion and increased power handling.

The new Ultimo Titanium subwoofers employ a new copper shorting ring to enable a more linear response by reducing distortion, resulting in a flat impedance response. This serves as a very critical component especially in subwoofers where distortion levels are relatively very high.

Other features are similar to its renowned sibling the Ultimo; A gigantic 5.1” Hexatech™ External Voice Coil (EVC™), the DMM™ (Dual Magnet Motor) motor design that achieves over 90% efficiency and the PFS™ (Progression Field Symmetry) spider/surround technology stiffens the spider as excursion levels increase, ensuring maximum linearity, minimum distortion, and truly flat response.

The culmination of these new advancements result in the Ultimo Titanium being the most dynamic car audio subwoofer series Morel has engineered, promising the highest resolution for ultimate in bass reproduction.

General Data
            2 Ohm 4 Ohm
Overall dimensions DxH     Ø 305mm (12”) X 146.9mm (5.78”)
Power handling RMS P     1000 W
Transient power 10ms       3000 W
Sensitivity 2.83 Vrms / 1M         87 dB                                 86.3 dB
Sensitivity 1W / 1M         85 dB
Frequency response       10-900 Hz.
Cone material       Carbon-fiber laminated paper
Net weight       6.7 Kg. (15 lb.)
Driver Displacement       2.6 Lit (0.09 cu.ft)
Voice Coil and Magnet Parameters
Voice Coil Diameter       130 mm (5.1”)
Voice coil height       37mm (1.45”)
Voice coil former       Titanium
Voice coil wire       Hexatech Aluminum
Number of layers       2
Max. Linear excursion X     ± 12.5mm (0.5”) (Each way)
Magnet system type       Double magnet vented
HE-Magnetic gap height HE     12mm (0.5”)
B flux density B     .64 T
BL product BXL       13.0 T.M
Electrical Data
Nominal Impedance Z         2.0 Ohm 4.0 Ohm
DC Resistance RE         1.7 Ohm 3.7 Ohm
Voice coil inductance @1KHz LBM         0.14 MH 0.44 MH
T-S Parameters
Suspension Compliance CMS         0.37 0.33
Mechanical Q Factor QMS         5.09 6.53
Electrical Q Factor QES         0.61 0.50
Total Q Factor QTS         0.54 0.46
Mechanical Resistance RMS         3.42 2.94
Moving Mass MMS         134 gr.  
Resonant Frequency FS         24 Hz  
Eq. Cas Air Load VAS     117 Lit (4.12 cu.ft)          103 Lit (3.63 cu.ft)
Effective Piston Area SD     0.0471 m²
Write Your Own Review
You're reviewing:Morel - Ultimo Ti 124 12inch SVC 4 ohm Subwoofer 1000 WRMS
SSL Certificate
Copyright © 2018 Ministry of Bass. All rights reserved.