Rockford Fosgate - RF-BLD - Balanced Line Driver

A$219.00
Shipped in 2-3 Working Days
SKU
780687328696
Balanced Line Driver

The RF-BLD is a 2-channel line driver that boosts low source unit signals or drives amplifiers located a long distance to the back of a vehicle. The BLD features Single Ended or Balanced Differential mode to eliminate noise.

  • 2 channel inputs/outputs
  • Low output impedance
  • Selectable 'Balanced Differential' or 'Single Ended' inputs and outputs
  • High voltage line driver
  • Output level indicators
  • Speaker level to RCA line level converter
  • Low distortion, low noise operation

RF-BLD

If your source unit has low output voltage or your amplifiers are located far back in a Van or SUV, the BLD is a perfect for your system. Featuring 'Balanced Differential' or 'Single Ended' mode, its high voltage output combined with a low output impedance will drive large arrays of amplifiers without breaking a sweat. In 'Balanced Differential' mode, it's twisted pair design also helps eliminate radiated noise through electrical cancellation.

Configuration: Line Driver
Operating Voltage: 9-16 VDC
Frequency Response: 20Hz - 50kHz ±1dB
Input Impedance: 20k Ohms
Output Impedance: 55 Ohms
Signal Input: High-Level: 2-channel (left/right) 
Low-Level: (2) RCA (left/right)
Signal Output: Low-Level: (2) RCA (left/right)
Input Voltage: 650mV to 10.5V RMS
Output Voltage: 11 Vrms Unbalanced 
22 Vrms Balanced
Gain: +0.8dB to +24dB
THD+N: 0.01%
Signal-to-Noise: ≥ 90dB @ 2V ('A' Weighted) 
≥ 110dB @ 10V ('A' Weighted)
Mounting: Behind Dash (install as close to source unit as possible)
Shipping Weight: 1.1 Lbs. 
(0.49 Kg.)
Dimensions (H x W x D): H 1.32" x W 5.90" x D 4.09" 
3.35cm x 15.0cm x 10.38cm
Write Your Own Review
You're reviewing:Rockford Fosgate - RF-BLD - Balanced Line Driver
SSL Certificate
Copyright © 2016 Ministry of Bass. All rights reserved.