Rockford Fosgate - PM600X4 - PUNCH MARINE - 4-Ch Amplifier 4 X 75WRMS @4 OHMS

$899.00
Shipped in 2-3 Working Days
SKU
780687345129

Punch Marine 600 Watt 4-Channel Amplifier

The PM600X4 is a 600 Watt 4-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection
  • Marine grade two part epoxy coating on circuit boards
  • Marine grade stainless steel hardware
  • 1 Year Standard Warranty

PM600X4

The Punch PM600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.

CEA-2006 Compliant: CEA-2006 Power Rating
75W x 4 @ 4Ω
≤1.0% THD+N
Number of Channels: 4
Rated Power 
(RMS Continuous Power):
75 Watts x 4 @ 4-Ohm 
150 Watts x 4 @ 2-Ohm 
300 Watts x 2 @ 4-Ohm Bridged
Total Power 
(Sum of Rated Power):
600 Watts
Dynamic Power 
(PVC/PowerCube®):
129 Watts x 4 @ 4-Ohms 0° Res 
211 Watts x 4 @ 2-Ohms 0° Res
Bridgeable: Yes
Frequency Response: 20Hz to 20kHz +/- 1.0dB
Efficiency (average): 68% @ 4-Ohm
Total Harmonic Distortion(THD+Noise): 4-Ohm: <1.0% 
2-Ohm: <1.0%
Crossover Controls: Front/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth 
Front/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth 
All-Pass: Yes
Tone Controls: Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or 
Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz 
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or 
Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz 
Function depends upon LP/AP/HP switch position
Input Sensitivity: 150 mV - 12 V
Signal Input: Hi/Low level: 2 RCA pair
Signal Output: Low level: 1 RCA pair
Power Input Connector: Captive C-Clamp
Power Wire Gauge: 4 AWG
Speaker Output Connector: Captive C-Clamp
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Punch Level Control (PLC2) Ready
Visual Indicators: Power/Protect/Thermal LED 
Power/Protect/Thermal LED 
Input Clip LED
Circuit Topology Class: Class-A/B
Operating Voltage: 9 - 16 VDC
Recommended Fuse 
(not included):
100 A
Max. Current Draw (13.8V Sinewave): 90 A
Average Current Draw (13.8V Music): 45 A
Suggested Alternator: 75 A
Shipping Weight: 12.8 Lbs. (5.80 Kg.)
Dimensions (H x W x D): 2.38 x 7.76 x 13.28 (in) 
6.05 x 19.71 x 33.73 (cm)
Dimensional Diagram:
Write Your Own Review
You're reviewing:Rockford Fosgate - PM600X4 - PUNCH MARINE - 4-Ch Amplifier 4 X 75WRMS @4 OHMS
SSL Certificate
Copyright © 2017 Ministry of Bass. All rights reserved.