Rockford Fosgate - P3-2X10 - Ported enclosure 2X10 Punch P3D4 subs 1000WRMS @ 1OHM

$999.00
Shipped in 2-3 Working Days
SKU
780687332983

Product Highlights:

  • ported hatchback-style enclosure with two 10" Punch P3 subwoofer
  • 5/8" medium density fiberboard construction covered with black carpet
  • 1-ohm total impedance
  • power handling: 1000 watts RMS (2000 watts peak power)
  • frequency response: 27-250 Hz
  • sensitivity: 85 dB
  • 13.125" x 31.125" x 15.125" 
    (33.3cm x 79.1cm x 38.4cm)
  • warranty: 1 year

What's in the box?

  • Vented subwoofer enclosure loaded with one Punch P3D2-12 12" Woofer
  • Installation and Operation Instructions

Features and Specs

General
Woofer Size (inches) 10
Woofer Material Anodized Aluminum
Enclosure Type Ported
Color Black
Pieces in System 2
Width (inches) 31.125
Height (inches) 15.125
Depth (inches) 13.125
Second Depth (inches)  
Connector Type Spring post
Frequency Response 27-250 Hz
Power Range (Watts RMS) 500-1000
Maximum Wattage 2000
Sensitivity 85 dB
Impedance 1 ohms
   

Product Research

Features

Punch Woofer: The enclosure houses two front-firing Rockford Fosgate Punch P3D4-12 12" subwoofer. The dual 4-ohm voice coils are internally wired in parallel to present a 1-ohm load. The sub features a hybrid StampCast basket, an Anodized aluminum cone, and Santoprene surround. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.

Spider: Dual spiders made from tear and fatigue resistant poly-cotton improve mechanical stability under high excursion, maintaining consistent excursion characteristics.

Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.

Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of one front firing 12" Punch P3 series subwoofer with a proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.

Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.

Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet is black.

Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.

Power Handling: The subwoofer can handle up to 1000 watts RMS; 2000 watts peak power.

CEA-2031 Compliant: Power handling on the P3D4-10 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.

Dimensions: The depth dimensions listed in Features & Specs include the subwoofer's trim ring, which adds approximately 7/8 of an inch. The depth of just the enclosure is 15-3/4 inches at the base and 13-1/8 inches at the top.

Write Your Own Review
You're reviewing:Rockford Fosgate - P3-2X10 - Ported enclosure 2X10 Punch P3D4 subs 1000WRMS @ 1OHM
SSL Certificate
Copyright © 2017 Ministry of Bass. All rights reserved.