Rockford Fosgate - P2-2X12 - Ported enclosure 2X12 Punch P2 subs 800WRMS @ 1OHM
- ported hatchback-style enclosure with two 12" Punch P2 subwoofers
- 5/8" medium density fiberboard construction covered with black carpet
- 1-ohm total impedance
- power handling: 300-800 watts RMS
- peak power: 1600 watts
- frequency response: 27-250 Hz
- sensitivity: 86 dB
- 33-7/8"W x 15-1/4"H x 16-5/8"D1 x 14"D2
- warranty: 1 year
What's in the box?
- Vented subwoofer enclosure loaded with two Punch P2D4-12 12" Woofers
- Installation and Operation Instructions
Features and Specs
|Woofer Size (inches)||12 x 2|
|Pieces in System||1|
|Second Depth (inches)||14|
|Connector Type||Spring post|
|Frequency Response||27-250 Hz|
|Power Range (Watts RMS)||300-800|
Punch Woofer: The enclosure houses two front-firing Rockford Fosgate Punch P2D4-12 12" subwoofers. Both woofers' dual 4-ohm voice coils are internally wired in parallel to present a 1-ohm load. The sub features a StampCast steel frame, a Kevlar fiber reinforced paper cone, and Santoprene surround. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.
Spider: Dual spiders made from tear and fatigue resistant poly-cotton improve mechanical stability under high excursion, maintaining consistent excursion characteristics.
Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.
Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of two front firing 12" Punch P2 series subwoofers with a proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.
Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.
Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet is black.
Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.
Power Handling: The subwoofer can handle up to 800 watts RMS; 1600 watts peak power.
CEA-2031 Compliant: Power handling on the P2D2-12 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.
Dimensions: The depth dimensions listed in Features & Specs include the subwoofer's trim ring, which adds approximately 7/8 of an inch. The depth of just the enclosure is 15-3/4 inches at the base and 13-1/8 inches at the top.