Rockford Fosgate - P2-1X12 - Ported enclosure 1X12 Punch P2 subs 400WRMS @ 1OHM

$469.00
Shipped in 2-3 Working Days
SKU
780687332952
  • ported hatchback-style enclosure with one 12" Punch P2 subwoofer
  • 5/8" medium density fiberboard construction covered with black carpet
  • 1-ohm total impedance
  • power handling: 150-400 watts RMS (800 watts peak power)
  • frequency response: 26-250 Hz
  • sensitivity: 86 dB
  • 19-1/8"W x 15-1/8"H x 16-5/8"D1 x 14"D2
  • warranty: 1 year

What's in the box?

  • Vented subwoofer enclosure loaded with one Punch P2D2-12 12" Woofer
  • Installation and Operation Instructions

Features and Specs

General
Woofer Size (inches) 12
Woofer Material Kevlar reinforced
Enclosure Type Ported
Color Black
Pieces in System 1
Width (inches) 19-1/8
Height (inches) 15-1/8
Depth (inches) 16-5/8
Second Depth (inches) 14
Connector Type Spring post
Frequency Response 26-250 Hz
Power Range (Watts RMS) 150-400
Maximum Wattage 800
Sensitivity 86 dB
Impedance 1 ohms
   

Product Research

Features

Punch Woofer: The enclosure houses one front-firing Rockford Fosgate Punch P2D2-12 12" subwoofer. The dual 2-ohm voice coils are internally wired in parallel to present a 1-ohm load. The sub features a StampCast steel frame, a Kevlar fiber reinforced paper cone, and Santoprene surround. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.

Spider: Dual spiders made from tear and fatigue resistant poly-cotton improve mechanical stability under high excursion, maintaining consistent excursion characteristics.

Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.

Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of one front firing 12" Punch P2 series subwoofer with a proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.

Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.

Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet is black.

Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.

Power Handling: The subwoofer can handle up to 400 watts RMS; 800 watts peak power.

CEA-2031 Compliant: Power handling on the P2D2-12 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.

Dimensions: The depth dimensions listed in Features & Specs include the subwoofer's trim ring, which adds approximately 7/8 of an inch. The depth of just the enclosure is 15-3/4 inches at the base and 13-1/8 inches at the top.

Write Your Own Review
You're reviewing:Rockford Fosgate - P2-1X12 - Ported enclosure 1X12 Punch P2 subs 400WRMS @ 1OHM
SSL Certificate
Copyright © 2017 Ministry of Bass. All rights reserved.