Vibe - BlackAir 10 inch Active Bandpass Enclosure

Blackair Loaded

The BlackAir Vented enclosure is loaded with the BlackAir 10” or BlackAir 12” Subwoofer, an engineering masterpiece of subwoofer design known for it’s perfect balance of power and precision.

The front gasket is made from high quality machined aluminum for a high-end aesthetic to complement the bold yellow fiberglass cone design.

The BlackAir’s striking yellow cone was designed using FEA (Finite Element Analysis) for optimum rigidity to weight ratio, the hybrid woofer cone is made from an absorbing polypropelyne and fiberglass. The result is increased depth and clarity of bass.

The BlackAir’s dual progressive poly-glass spiders provide control and stability of the woofer cone whilst minimizing weight.

Whilst traditional rubber surrounds will have different suspension characteristics at the extreme ends of excursion; The BlackAir features a specially developed foam rubber multi-roll surround allowing much better linearity throughout the subwoofers excursion range.

The angular torsion basket provides rigidity and support for the motor and moving parts of the subwoofer. The 5 vented arms of the torsion basket cradle the coil and allow it to breathe cool air when in motion.

The subwoofer motor was designed using FEMM (Finite Element Method Magnetics) giving linear flux saturation and low distortion, to ensure great sound quality. Using FEMM we can use the maximum magnetic force of the magnet to drive the cone

What is Bandpass

Bandpass Enclosures are designed to get the best performance from the subwoofer and allow bass performance that would normally only be possible from a sealed or ported enclosure twice the size.

In a Bandpass design the subwoofer is placed inside the enclosure where it can be worked much harder, with increased pressure on the front and back of the cone.

Overall Bandpass Enclosures result in better efficiency from the subwoofer and amplifier, considerably more volume, greater bass presence and a bigger, deeper bass sound.

The BlackAir Bandpass push enclosure engineering to the extreme, producing unbelievable levels of bass previously unheard of from an enclosure of this size.

Specifications 

Height:  12.8" (325mm)
Width:  21.3" (540mm)
Depth:  15.6" (397mm)
Driver:  Blackair 10"
Impedance:  4 Ohms
RMS Power:  500W
Peak Power:  1500W
Turbo Ports:  1
Characteristics:  Loud Hard Punch
Active Amp Built in:  PowerBox Bass 1