Vibe - Black Death Box 1000W RMS 4 Ch Amp

The BlackDeath Amplifier Range

VIBE Audio’s BlackDeath series is very well respected amongst serious dB drag and SPL competitors, and now VIBE have added a monstrous heavyweight amplifier to the range, The Reaper.

BlackDeath Bass 2 : The Reaper

The BlackDeath Bass 2, more commonly known as “The Reaper” is the biggest VIBE amplifier ever, both in size at over 3 foot long and in power output- At 18v DC the Reaper is capable of with 14,500 w RMS @ 1Ω making it the ideal choice for those who want to become serious competition contenders.

Click on the image below to visit the Reaper page.

BlackDeath Bass 1

The BlackDeath Bass 1 is a heavyweight series amplifier for competition or killer street bass, brutal performance taken to extreme levels.

The highly efficient Class GH power supply provides the clean sound quality of Class AB, but with the efficiency comparable to Class D. Class GH technology means that the BlackDeath Bass 1’s dampening factor is 20 times better than Class D with 20 times less Distortion and very low EMI radiation.

The multispeed fan control allows efficient cooling of internal components even when handling extreme power. Clipping detection influences the fan speed and is displayed on the panel lighting for diagnostics checks.

VIBE has invested in some of the most advanced, cutting edge amplifier protection circuitry for the BlackDeath Bass 1. The thermal, short circuit, reverse polarity and overvoltage protection circuitry is all microprocessor controlled with diagnostics available from the Bass 1’s LED error display.

Features

BlackDeath Bass 1 – Strappable

The BlackDeath Bass 1 amplifier is strappable, allowing 2 amplifiers to the deliver full power output of each amplifier into a single channel (of up to 5000w RMS @ 2Ω Mono Strapped). The Slave/ Master circuit allows an infinite number of amplifiers to be daisy chained together, with only the controls on the master needing to be set.

Heatsink

The extruded aluminum heatsink incorporates the newest ICC (Internal Convection Cooling) vented technology to eliminate the need for external cooling fins, enhancing the contemporary aesthetics of the amp whilst keeping the internals cool however it is mounted.

24dB Crossover

The BlackDeath Bass 1 is designed to deliver the best sound quality at highest power. The onboard Linkwitz Riley 24db per octave active crossover provides superior sound quality, with the Subsonic and Low Pass filters removing unwanted frequencies for a better bass output.

BlackDeath Stereo 4

Deliver deadly power to your audio install with the BlackDeath Stereo 4. Capable of 4x 175watts RMS at 2Ω and a peak power of 1400watts this amplifier will take your audio install to the next level.

The Class AB amplifier is designed for superior audiophile sound quality with low noise and minimal distortion. An active crossover network, with both low pass and high pass filters help deliver a clean signal to your speakers free from unwanted audio frequencies.

The amplifier’s MOSFET Power allows high switching speeds and greater stability than other FETs to improve overall performance.

Cutting edge thermal, short circuit, reverse polarity and overvoltage protection circuitry will safeguard the BlackDeath Stereo 4 against damage even when handling extreme power.

Features

High Level Input

The high level input allows direct connection to the speaker output of a headunit and VIBE Audio’s AutoSense technology turns the amplifier to turn on and off without the need for a remote turn-on wire. All 4 channels on the BlackDeath Stereo 4 can be driven from a two channel input.

2 / 4 Inputs

All four channels can be driven from a two channel input.

Crossover

The BlackDeath Stereo 4 has a built in low pass filter (30 Hz – 300 Hz), a high pass filter (50 Hz – 1 KHz) and a built in bass boost capable of delivering upto an extra 24 dB of bass.

What’s in the box

» One BlackDeath Amplifier
» Remote Bass Control (BlackDeath Bass 1 Only)
» Manual
» 12 Month Warranty card
» Microfibre Cleaning Cloth / Bag
» VIBE Sticker
» VIBE Keyring

Features

Quality of class AB with the efficiency of class D

Limits the amunt of high frequency output

Connect to speaker output of head unit

Amplifier gain can be controlled from the front of the vehicle

Connect two smaller amps to give the appearance of one large amplifier

Superior audiophile sound quality

Allows the amplifier to turn on and off without the need for remote turn-on wire

Limits low frequency output

Superior sound via steep crossover

High switching speed and greater stability

Variable frequency and bass boost

All four channels can be driven from a two channel input

Microprocessor protects the amplifier

Limits very low frequency output

Specifications

Type: 4 Channel
Height : 2.2" (57 mm)
Width : 19.1" (484 mm)
Depth : 8.8" (224mm)
RMS @ 4 Ohm Stereo :  4 x 125 watts
RMS @ 2 Ohm Stereo :  4 x 175 watts
RMS @ 4 Ohm Mono : 2 x 350 watts
RMS @ 2 Ohm Mono :
RMS @ 1 Ohm Mono :
Max Power : 1400 watts
Freq Response : 9 Hz - 35 kHz
SNR : 97dB
Crossover Type : LP / HP / Flat
Crossover Range : 30 Hz - 1 kHz
Topology : Class AB