Morel - Ultimo Ti 122 12inch SVC 2 ohm Subwoofer 1000 WRMS

$1,565.00
Shipped in 2-3 Working Days
SKU
ultimo Ti 122

Morel - Ultimo Ti 12inch SVC 2 ohm Subwoofer 1000 WRMS

While most subwoofers are little more than high-output bass makers, the Ultimo series was engineered with a synergy of tight, controlled musicality and life-like deep bass reproduction with no equal for delivering the ultimate bass experience.

Ultimo Titanium subwoofers are engineered to set a new standard in subwoofer technology and bass performance, equipped with Morel’s most advanced, cutting–edge technology derived from the company’s HiFi bass drivers. At the heart of the new subwoofers is Morel’s titanium voice coil former. Exceptionally stiff and lightweight, the titanium improves the dynamics of the driver for even quicker transient response, with lower distortion and increased power handling.

The new Ultimo Titanium subwoofers employ a new copper shorting ring to enable a more linear response by reducing distortion, resulting in a flat impedance response. This serves as a very critical component especially in subwoofers where distortion levels are relatively very high.

Other features are similar to its renowned sibling the Ultimo; A gigantic 5.1” Hexatech™ External Voice Coil (EVC™), the DMM™ (Dual Magnet Motor) motor design that achieves over 90% efficiency and the PFS™ (Progression Field Symmetry) spider/surround technology stiffens the spider as excursion levels increase, ensuring maximum linearity, minimum distortion, and truly flat response.

The culmination of these new advancements result in the Ultimo Titanium being the most dynamic car audio subwoofer series Morel has engineered, promising the highest resolution for ultimate in bass reproduction.

SPECIFICATIONS
   ULTIMO Ti 12
General Data
           
2 Ohm
4 Ohm
Overall dimensions
DxH
   
Ø 305mm (12”) X 146.9mm (5.78”)
Power handling RMS
P
   
1000 W
Transient power 10ms
     
3000 W
Sensitivity 2.83 Vrms / 1M
       
87 dB                                 86.3 dB
Sensitivity 1W / 1M
       
85 dB
Frequency response
     
10-900 Hz.
Cone material
     
Carbon-fiber laminated paper
Net weight
     
6.7 Kg. (15 lb.)
Driver Displacement
     
2.6 Lit (0.09 cu.ft)
Voice Coil and Magnet Parameters
Voice Coil Diameter
     
130 mm (5.1”)
Voice coil height
     
37mm (1.45”)
Voice coil former
     
Titanium
Voice coil wire
     
Hexatech Aluminum
Number of layers
     
2
Max. Linear excursion
X
   
± 12.5mm (0.5”) (Each way)
Magnet system type
     
Double magnet vented
HE-Magnetic gap height
HE
   
12mm (0.5”)
B flux density
B
   
.64 T
BL product
BXL
     
13.0 T.M
Electrical Data
Nominal Impedance
Z
       
2.0 Ohm
4.0 Ohm
DC Resistance
RE
       
1.7 Ohm
3.7 Ohm
Voice coil inductance @1KHz
LBM
       
0.14 MH
0.44 MH
T-S Parameters
Suspension Compliance
CMS
       
0.37
0.33
Mechanical Q Factor
QMS
       
5.09
6.53
Electrical Q Factor
QES
       
0.61
0.50
Total Q Factor
QTS
       
0.54
0.46
Mechanical Resistance
RMS
        3.42
2.94
Moving Mass
MMS
       
134 gr.
 
Resonant Frequency
FS
       
24 Hz
 
Eq. Cas Air Load
VAS
   
117 Lit (4.12 cu.ft)          103 Lit (3.63 cu.ft)
Effective Piston Area
SD
   
0.0471 m²
Write Your Own Review
You're reviewing:Morel - Ultimo Ti 122 12inch SVC 2 ohm Subwoofer 1000 WRMS
SSL Certificate
Copyright © 2017 Ministry of Bass. All rights reserved.