Cyclops - SEN-006 - Dual Stage Shock Sensor

A$60.00
Shipped in 2-3 Working Days
SKU
SEN006

Cyclops - SEN-006 - Dual Stage Shock Sensor

Introduction

Dual stage shock sensor uses a microprocessor based controller to actively monitor vibration. A steady increase in background vibration is ignored, while a large impact will be considered an intrusion

•Proudly Australian

Designed and engineered in Perth, Western Australia

Operation

•Vibration Protection

Shock sensors will protect glass. Intruder attempting to interfere with either items will exert vibration upon the vehicle

•Independent Pre-shock Output

Small vibrations exerted on the vehicle will result is a short series of 6 siren chirps

•Independent Full-shock Output

Strong vibrations will trigger the sensor in full, sounding siren

•Environment adjustment

The fuzzy-logic aspect of the sensor enables it to adjust it's sensitivity setting if the environment around the sensor becomes vibration filled. Imagine an approaching truck, the vibration increase steadily, then decreases as it passes. The SEN-006 lowers the sensitivity while the truck is passing, then returns to normal when everything settles

•Temperature compensative circuitry

Ensures sensitivity does not change as ambient temperature rises or falls

•Sensitivity adjustment

Sensor allows installer to adjust sensitivity to provide compatibility with different size vehicles

Visual Output

•Trigger status indicator

LED indicator shows when sensor is triggered (dual stage/zone sensors include one colour for each trigger)

Specifications

•Super low current draw

5.3mA when idle, 5.9mA when pre-triggered, 11.6mA when fully triggered. Both trigger current draw only last 2 seconds

•Wide Operating voltage

Operating voltage +9VDC to +15VDC

•Operating temperature

-20 degrees to +85 degrees for equipment designed to be installed within vehicle cabin

•Polarity protection

The system circuitry is design to protect itself against accidental battery polarity reversal. This can happen when replacing the vehicle battery

•Trigger output rating

Each output of the sensor can sink 300mA, suitable for energising relay coil when necessary

•Trigger output is back EMF protected

Clamping diode protects the output driver transistor(s) to stop damage from the super high voltages that occur when a relay coil is released

•Power Consumption

Each additional sensor added to a system will increase it's over-all power consumption from the car battery. See the list of each sensor's power consumption.

Compatibility

•Compatible with Cyclops remote control systems

Cyclops range of immobilisers/alarms : P355, P375, P375B, P385, P455, P485,P755, P775, P775B, P785, KE-CLR-TX90, KE-CLR-TX11, S35i, S35B, S35C, S75i, S75B, S455, S485 and S75C

Warranty

•Manufacturers warranty

Guarantees product is free from manufacturing defects for 12 months from time of purchase 

Standards Compliance

•Manufactured in ISO9001 facility

Built within world standard production facility

Write Your Own Review
You're reviewing:Cyclops - SEN-006 - Dual Stage Shock Sensor
SSL Certificate
Copyright © 2016 Ministry of Bass. All rights reserved.